Addon 3D Tree of life pink
International Ring Size Guide
Mood Size EU (mm) size of the circumference |
US | UK | Diameter (mm) |
|---|---|---|---|
| 50 | US 5 | J | 15,7 |
| 52 | US 6 | L | 16,5 |
| 54 | US 7 | N | 17,2 |
| 56 | US 8 | P | 17,8 |
| 58 | US 8,25 | P 1/2 | 18,4 |
| 60 | US 9 | R | 19,1 |
| 62 | US 10 | T | 19,7 |
| 64 | US 10,75 | V | 20,3 |
| 66 | US 11,5 | X | 21 |
| 68 | US 12,25 | Z | 21,5 |
| 70 | US 13 | Z+1 | 22,3 |
| 72 | US 13,75 | 22,9 |
Determine the correct size of your ring
1st method: using a ring you already own (diameter)
You already have a ring on hand? Then simply measure the inside diameter of the ring. You can then find your size by converting using the table above.
If you can't find your exact size, then take the next size up.
2nd method: order a multisizer
You can order our multisizer to mesure your finger here.
3rd method: measure the circumference of your finger
To find out your ring size, simply take a piece of wire, dental floss or paper. Wrap it loosely around the spot on your finger where you want to wear the ring and mark where it overlaps. Then measure the length. The millimeters measured reflect the inner circumference of the ring.
If you can't find your exact size in the chart above, then take the size that is above. For example, if your finger circumference is 57mm, then take the size 58.
Example : 52 mm (circumference)
Addon "3D Tree of life pink"
Design: Amila Pousaz
We invite you to join us in a world of fascination, where the strength of steel blends harmoniously with the timeless symbolism of the Tree of Life.
This addon was imagined by our designer Amila following a shared vision with Stéphanie. In a way, this magnificent creation is the result of a beautiful mother-daughter collaboration that gives even more meaning to the symbolism of this creation: the Tree of Life, representing strength, growth and universal connection, comes to life before your eyes in a symphony of cut steel.
Precautions/informations
Limited stock. The base and the insert are not included in price.
Non contractual photos.
This addon is made in 2 overlapping parts: a coloured aluminium lower part and a steel upper part. For this addon to be complete, the two parts must be worn together. However, we tried wearing it without the insert (the part that goes underneath) and it looks really nice despite a few millimetres of space that can make the part move.
Click here to discover the inserts.
Please note that there may be a difference in colour between the photos on the website and the model you receive.
Back to All Products > 50 CHF
