Addon 3D Leaf - Mood Lovers
International Ring Size Guide
Mood Size EU (mm) size of the circumference |
US | UK | Diameter (mm) |
---|---|---|---|
50 | US 5 | J | 15,7 |
52 | US 6 | L | 16,5 |
54 | US 7 | N | 17,2 |
56 | US 8 | P | 17,8 |
58 | US 8,25 | P 1/2 | 18,4 |
60 | US 9 | R | 19,1 |
62 | US 10 | T | 19,7 |
64 | US 10,75 | V | 20,3 |
66 | US 11,5 | X | 21 |
68 | US 12,25 | Z | 21,5 |
70 | US 13 | Z+1 | 22,3 |
72 | US 13,75 | 22,9 |
Determine the correct size of your ring
1st method: using a ring you already own (diameter)
You already have a ring on hand? Then simply measure the inside diameter of the ring. You can then find your size by converting using the table above.
If you can't find your exact size, then take the next size up.
![](https://cdn.shopify.com/s/files/1/0798/2303/files/diametre_480x480.jpg?v=1627901357)
2nd method: order a multisizer
You can order our multisizer to mesure your finger here.
3rd method: measure the circumference of your finger
To find out your ring size, simply take a piece of wire, dental floss or paper. Wrap it loosely around the spot on your finger where you want to wear the ring and mark where it overlaps. Then measure the length. The millimeters measured reflect the inner circumference of the ring.
If you can't find your exact size in the chart above, then take the size that is above. For example, if your finger circumference is 57mm, then take the size 58.
Example : 52 mm (circumference)
Addon "3D Leaf" - Mood lovers"
Original idea and design: Amila Pousaz
& sketches by mood lovers
What makes this ring special is that it wasn't designed by our designers, but by our customers. It's a ring that captures the magic of autumn and our customers' love of nature.🍂
Precautions / informations
Limited stock. The base and the insert are included in price.
Non contractual photos.
Due to its design, this addon requires special care and may be more fragile than our other parts. We advise you to handle it with care.
This addon is made in 2 overlapping parts: a lower part in aluminum and an upper part in cut steel. For this addon to be complete, the two parts must be worn together. Nevertheless, we tried wearing it without the insert (the part that goes underneath) and it looks really nice, despite a few millimeters of space that can make the part mobile.
Click here to discover the inserts.
Please note that the colour of the addon and its designs may vary depending on the light..
ATTENTION: this addon is not compatible with the extra small base (9mm).